{"id":11758,"date":"2026-06-13T18:00:29","date_gmt":"2026-06-13T10:00:29","guid":{"rendered":"https:\/\/www.cncmachiningshops.com\/?p=11758"},"modified":"2026-07-15T22:11:16","modified_gmt":"2026-07-15T14:11:16","slug":"pad-printing-process","status":"publish","type":"post","link":"https:\/\/www.cncmachiningshops.com\/pt\/pad-printing-process\/","title":{"rendered":"Processo de Tampografia: Quando Voc\u00ea Deve Us\u00e1-lo para Marca\u00e7\u00e3o de Produtos?"},"content":{"rendered":"
\n

Quick Answer:<\/strong> The pad printing process (also called tampography) transfers ink from a shallow-etched clich\u00e9 plate onto a product surface using a flexible silicone pad. The pad’s elasticity allows it to compress against and conform to curved, concave, textured, and irregular surfaces \u2014 a capability that flat printing methods cannot replicate. Achievable feature resolution is approximately 0.1\u20130.2 mm line width, making pad printing suitable for small logos, fine text, serial numbers, and detailed icons. It is the standard marking method for automotive buttons and switches, medical device housings and syringe scales, consumer electronics enclosures, and industrial control components where the surface geometry prevents flat printing contact. Pad printing is not suitable for large-area graphics (where screen printing is more efficient), permanent identification marks (where laser marking provides engraved durability), or surfaces with very low surface energy such as silicone and PTFE (where adhesion is unreliable without surface activation).<\/p><\/blockquote>\n

\n

How the Pad Printing Process Works<\/h2>\n

The pad printing process transfers a defined ink image from a steel or photopolymer clich\u00e9 (plate) to the product surface through a five-step cycle:<\/p>\n

Step 1 \u2014 Clich\u00e9 preparation:<\/strong> The image is etched into the clich\u00e9 plate at a depth of approximately 20\u201330 \u00b5m (shallow etch for fine detail) to 35\u201345 \u00b5m (deeper etch for more ink volume and saturation). The etch depth determines ink film thickness and color saturation: deeper etch produces more opaque, saturated colors; shallower etch produces finer resolution with thinner ink deposition.<\/p>\n

Step 2 \u2014 Ink flooding:<\/strong> A flood blade spreads ink across the clich\u00e9 surface, filling the etched image area. Excess ink is then scraped off the plate surface by a doctor blade, leaving ink only in the etched recesses.<\/p>\n

Step 3 \u2014 Pickup:<\/strong> A silicone pad presses onto the inked clich\u00e9. The ink temporarily adheres to the silicone pad surface through a controlled adhesion differential \u2014 the ink adheres more strongly to the silicone than to the clich\u00e9 at this moment due to controlled thixotropic properties of the pad printing ink.<\/p>\n

Step 4 \u2014 Transfer:<\/strong> The ink-loaded pad retracts from the clich\u00e9 and moves over the target product. As the ink film on the pad begins to lose solvent (it becomes slightly tacky), the pad presses onto the product surface. The ink now adheres more strongly to the product surface than to the silicone, completing the transfer. The silicone leaves the product surface clean.<\/p>\n

Step 5 \u2014 Cure or dry:<\/strong> Depending on the ink system, the deposited ink film dries by solvent evaporation (standard pad printing inks), cross-links under UV exposure (UV-curable inks), or is heat-cured in an oven.<\/p>\n

The conformability mechanism:<\/strong> The silicone pad is the defining feature of the process. During transfer, the pad compresses elastically around the product surface profile \u2014 including convex spherical surfaces, cylindrical surfaces, and concave areas accessible from above. The ink film, which is thin (typically 2\u20138 \u00b5m dry film thickness) and flexible, follows the pad geometry and transfers to surfaces that would be inaccessible to a flat printing screen or direct-contact printing method. This is why pad printing is the standard process for convex button surfaces, cylindrical syringe barrels, and irregular-geometry control components.<\/p>\n

\n

Materials Compatible with Pad Printing<\/h2>\n

Pad printing can be applied to a broad range of materials, but the quality and durability of the printed mark depend on the material’s surface energy, the ink system selected, and whether surface preparation is required.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Material<\/th>\nPad Printing Suitability<\/th>\nTypical Requirement<\/th>\nKey Consideration<\/th>\n<\/tr>\n<\/thead>\n
ABS<\/td>\nExcellent<\/td>\nStandard pad printing ink; usually no pre-treatment<\/td>\nHigh surface energy; most common for consumer electronics<\/td>\n<\/tr>\n
Polycarbonate (PC)<\/td>\nExcellent<\/td>\nStandard ink; occasional primer for critical adhesion<\/td>\nGood adhesion; used for medical housings and automotive<\/td>\n<\/tr>\n
Polypropylene (PP)<\/td>\nModerate \u2014 requires pre-treatment<\/td>\nFlame, plasma, or corona treatment before printing<\/td>\nLow surface energy (~32 mN\/m); ink adhesion poor without activation<\/td>\n<\/tr>\n
Nylon (PA)<\/td>\nModerate<\/td>\nSpecialized moisture-resistant ink; sometimes primer<\/td>\nHygroscopic; moisture absorption affects adhesion<\/td>\n<\/tr>\n
ABS\/PC blend<\/td>\nExcellent<\/td>\nStandard ink<\/td>\nCommon medical and electronics application<\/td>\n<\/tr>\n
Aluminum (anodized)<\/td>\nGood<\/td>\nSurface cleaning and degreasing; primer for harsh environments<\/td>\nGood surface energy when clean; anodized surface improves adhesion<\/td>\n<\/tr>\n
Aluminum (bare\/machined)<\/td>\nModerate<\/td>\nDegreasing + primer or adhesion promoter<\/td>\nOxide layer variability; adhesion less consistent without prep<\/td>\n<\/tr>\n
Stainless steel<\/td>\nModerate<\/td>\nDegreasing; primer recommended for wear resistance<\/td>\nGood when prepared; used for instrument panels<\/td>\n<\/tr>\n
Glass<\/td>\nModerate<\/td>\nSpecialized glass-compatible ink; sometimes silane primer<\/td>\nSmooth, non-porous; requires high-adhesion ink system<\/td>\n<\/tr>\n
Silicone rubber<\/td>\nPoor \u2014 not recommended without special treatment<\/td>\nPlasma or corona treatment required; specialized silicone inks<\/td>\nVery low surface energy (~22 mN\/m); standard inks do not bond reliably<\/td>\n<\/tr>\n
PTFE<\/td>\nPoor \u2014 not recommended<\/td>\nSpecial chemical activation required<\/td>\nExtremely low surface energy; essentially non-printable by standard methods<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Surface energy determines adhesion:<\/strong> A material’s surface energy (measured in mN\/m) indicates how readily a liquid ink will wet and adhere to it. High-surface-energy materials (ABS at approximately 42 mN\/m, polycarbonate at approximately 46 mN\/m) wet easily and produce durable ink adhesion. Low-surface-energy materials (polypropylene at approximately 30\u201332 mN\/m, silicone at approximately 22 mN\/m, PTFE at approximately 18\u201320 mN\/m) resist wetting and produce poor adhesion. Surface treatments \u2014 flame treatment, corona discharge, plasma activation \u2014 raise the surface energy of low-energy polymers by oxidizing the surface layer, creating functional groups that improve ink bonding.<\/p>\n

Ink selection is material-specific:<\/strong> Pad printing inks are formulated for specific substrate categories. Using a general-purpose ABS ink on polycarbonate produces acceptable initial adhesion but typically fails cross-hatch adhesion testing (ASTM D3359). Ink suppliers provide substrate-specific formulations; specifying the final substrate material during ink selection is essential for field durability.<\/p>\n

\n

Pad Printing vs Screen Printing<\/h2>\n

Screen printing uses a mesh stencil through which ink is forced directly onto the substrate surface with a squeegee. The mesh contact requires a flat or near-flat surface; any surface curvature beyond approximately 5\u201310 mm across the print area causes the mesh to lose contact, producing incomplete ink transfer and distorted image edges.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
Factor<\/th>\nPad Printing<\/th>\nScreen Printing<\/th>\n<\/tr>\n<\/thead>\n
Surface geometry<\/td>\nCurved, concave, irregular surfaces<\/td>\nFlat or very slightly curved surfaces only<\/td>\n<\/tr>\n
Print area per cycle<\/td>\nTypically 50\u2013150 mm maximum width<\/td>\nUp to 500+ mm; efficient for large areas<\/td>\n<\/tr>\n
Resolution<\/td>\n~0.1\u20130.2 mm feature size<\/td>\n~0.2\u20130.5 mm typical; coarser for large areas<\/td>\n<\/tr>\n
Ink layer thickness (dry)<\/td>\n2\u20138 \u00b5m<\/td>\n8\u201330+ \u00b5m (thicker ink deposits)<\/td>\n<\/tr>\n
Color saturation<\/td>\nModerate \u2014 thin ink layer<\/td>\nHigh \u2014 thicker ink, more opaque<\/td>\n<\/tr>\n
Setup cost<\/td>\nLower (clich\u00e9 is inexpensive vs screen)<\/td>\nModerate (screen mesh, frame, stencil)<\/td>\n<\/tr>\n
Production speed<\/td>\nModerate \u2014 pad cycle time limits throughput<\/td>\nFast for large flat areas<\/td>\n<\/tr>\n
Typical applications<\/td>\nButtons, switches, knobs, cylindrical parts, medical housings<\/td>\nFlat panels, labels, enclosures, T-shirts, signage<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

When to choose screen printing over pad printing:<\/strong> Screen printing is more efficient when the graphic is large (wider than approximately 100\u2013150 mm), the surface is flat, and color saturation matters (screen printing deposits 3\u20135\u00d7 more ink per pass, producing more opaque color coverage). For membrane switch overlays, instrument panels, and flat container labels, screen printing offers lower cost per unit at volume.<\/p>\n

When pad printing is the only practical option:<\/strong> Any surface with curvature, recesses, or features that prevent flat mesh contact requires pad printing. Automotive control buttons with dome-profile surfaces, medical device housings with rounded edges, and connector housings with ridged surfaces are all surfaces where screen printing contact is inconsistent. The pad printing silicone adapts to these geometries; the screen mesh cannot.<\/p>\n

\n

Pad Printing vs Laser Marking<\/h2>\n

Laser marking removes or alters surface material (metal or plastic) using a focused laser beam, producing a permanent mark by annealing, ablation, foaming, or carbonization. The mark is engraved into or chemically altered within the surface \u2014 there is no ink film to degrade.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
Factor<\/th>\nPad Printing<\/th>\nLaser Marking<\/th>\n<\/tr>\n<\/thead>\n
Mark durability<\/td>\nSurface ink \u2014 susceptible to mechanical abrasion, solvents<\/td>\nPermanent \u2014 engraved into or fused with surface material<\/td>\n<\/tr>\n
Color capability<\/td>\nFull color range available<\/td>\nTypically single color (metal contrast or polymer carbonization)<\/td>\n<\/tr>\n
Branding and graphics<\/td>\nExcellent \u2014 supports detailed multi-color logos<\/td>\nLimited \u2014 suitable for text, codes, simple graphics<\/td>\n<\/tr>\n
QR codes and data matrix<\/td>\nAchievable (0.2+ mm cell size)<\/td>\nExcellent (0.1 mm cell size achievable)<\/td>\n<\/tr>\n
Setup cost<\/td>\nLow (clich\u00e9 plate)<\/td>\nHigh (laser system capital cost; $5,000\u2013$50,000+)<\/td>\n<\/tr>\n
Cost per part<\/td>\nVery low (ink + pad wear)<\/td>\nLow to moderate (electricity; consumables minimal)<\/td>\n<\/tr>\n
Sterilization resistance<\/td>\nInk-dependent; requires validated ink system<\/td>\nExcellent \u2014 no ink to degrade<\/td>\n<\/tr>\n
Regulatory traceability (medical, aerospace)<\/td>\nNot typically accepted for permanent identification<\/td>\nAccepted for UDI (Unique Device Identification) in FDA 21 CFR 830<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

When laser marking is required instead of pad printing:<\/strong> Applications requiring permanent, indelible identification \u2014 FDA Unique Device Identification (UDI) on medical devices, part traceability in aerospace manufacturing, serial numbers on automotive safety components \u2014 cannot use ink-based marking because the mark could theoretically be altered or eroded. Laser marking (or laser engraving) produces marks that are integral to the surface material and cannot be removed without destroying the part surface. For these applications, pad printing is not an acceptable alternative regardless of ink quality.<\/p>\n

Combining both processes:<\/strong> Many production parts use both methods: laser marking for permanent identification (serial number, QR code, regulatory marks) and pad printing for visual branding (logo, color icons, user-interface graphics). This combination is standard practice in medical device manufacturing and premium consumer electronics.<\/p>\n

\n

Durability and Environmental Limitations of Pad Printing<\/h2>\n

Mechanical abrasion:<\/strong> Pad-printed marks are surface-applied ink films 2\u20138 \u00b5m thick. Repeated mechanical contact \u2014 buttons pressed thousands of times, handles gripped repeatedly, panels wiped with abrasive cloths \u2014 progressively erodes the ink layer. Durability testing (simulated button presses per IEC or ASTM standards, or RCA abrasion test) should be specified and validated for high-wear applications before committing to pad printing as the marking method.<\/p>\n

Chemical resistance:<\/strong> Most standard pad printing inks are solvent-based and susceptible to aggressive solvents, acids, and strong cleaning agents. Medical device cleaning validation (testing with disinfectants used in the clinical environment) is mandatory for any pad-printed medical device marking. Ink suppliers provide chemical resistance data for their formulations; the specific chemicals used in the product’s service environment must be tested rather than assumed.<\/p>\n

Temperature and UV exposure:<\/strong> Standard pad printing inks have service temperature limits typically in the range of -20\u00b0C to +80\u00b0C. Outdoor applications with UV exposure cause color fading over time unless UV-stable inks are specified. Products used in automotive under-hood environments, outdoor industrial equipment, or high-temperature processing equipment require specialized ink systems with validated thermal and UV stability.<\/p>\n

High-wear applications where laser marking should replace pad printing:<\/strong> Industrial control buttons subject to thousands of actuations, medical instruments subject to repeated sterilization cycles, outdoor equipment with UV and weather exposure, and any product where ink wear creates a safety or regulatory compliance risk should be evaluated for laser marking as the primary identification method, with pad printing used only for decorative elements that are not safety-critical.<\/p>\n

\n

Process Selection Guide for Product Marking<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Requirement<\/th>\nRecommended Process<\/th>\nReason<\/th>\n<\/tr>\n<\/thead>\n
Curved, convex, or irregular surface<\/td>\nPad printing<\/td>\nSilicone pad conforms to surface geometry<\/td>\n<\/tr>\n
Small detailed logo or fine text (<5 mm height)<\/td>\nPad printing<\/td>\n0.1\u20130.2 mm resolution capability<\/td>\n<\/tr>\n
Large flat panel graphics (>100 mm)<\/td>\nScreen printing<\/td>\nHigher coverage efficiency and ink opacity<\/td>\n<\/tr>\n
Permanent serial number or regulatory ID<\/td>\nLaser marking<\/td>\nIndelible, cannot be erased or altered<\/td>\n<\/tr>\n
Multi-color branding on complex geometry<\/td>\nPad printing (multi-pass)<\/td>\nSequential registration possible<\/td>\n<\/tr>\n
High-wear mechanical surface (repeated contact)<\/td>\nLaser marking or anodizing<\/td>\nNo ink film to erode<\/td>\n<\/tr>\n
Medical device UDI marking<\/td>\nLaser marking<\/td>\nFDA 21 CFR 830 traceability requirement<\/td>\n<\/tr>\n
Low-cost visual marking on ABS\/PC parts<\/td>\nPad printing<\/td>\nLow per-part cost; excellent adhesion on standard plastics<\/td>\n<\/tr>\n
Low-surface-energy materials (PP, silicone)<\/td>\nPad printing with surface pre-treatment<\/td>\nRequires flame\/plasma\/corona activation before printing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Key Takeaways<\/h2>\n
    \n
  • The pad printing process uses a flexible silicone pad to transfer ink indirectly from an etched plate to the product surface<\/strong>: the pad’s conformability is what distinguishes it from all flat printing methods, enabling printing on curved, concave, convex, and irregular surfaces where screen printing or direct-contact methods lose contact and produce distorted marks.<\/li>\n
  • Achievable resolution is approximately 0.1\u20130.2 mm feature size<\/strong>: this is sufficient for logos, icons, small text, serial numbers, and most visual branding applications. Below 0.1 mm line width, laser marking typically produces more reliable results.<\/li>\n
  • Ink adhesion is determined by substrate surface energy, ink system selection, and surface preparation<\/strong>: ABS and polycarbonate accept standard pad printing inks without pre-treatment; polypropylene, nylon, metals, and glass require specific ink systems and may require surface activation (flame, plasma, corona, or primer).<\/li>\n
  • Pad printing produces a thin ink film (2\u20138 \u00b5m dry thickness) that is not permanent<\/strong>: durability depends on ink system, surface preparation, and service environment. Chemical resistance, abrasion resistance, and UV stability must be validated against actual use conditions, not assumed.<\/li>\n
  • Screen printing is more efficient for large flat graphics (>100\u2013150 mm) and provides more opaque ink coverage<\/strong>: pad printing is not the correct process for large-area decoration. The selection between pad printing and screen printing is driven primarily by surface geometry, not by graphic quality preference.<\/li>\n
  • Laser marking is required for permanent identification and regulatory traceability applications<\/strong>: FDA UDI requirements for medical devices, part traceability in aerospace, and any marking that must be indelible should use laser marking, not pad printing. The two processes are frequently used together on the same product.<\/li>\n
  • For OEM procurement and product design teams<\/strong>: when specifying pad printing for a production part, the following information should be provided to the marking supplier: substrate material and grade (not just “plastic” but “ABS, Sabic Cycolac MG47”), surface condition (as-molded, painted, anodized), print area dimensions and geometry, required ink color system (Pantone, RAL, or specific match), durability test requirements (chemical resistance protocol, abrasion cycles, temperature range), and production volume. Missing any of these factors at the quotation stage produces estimates that do not reflect the actual process requirements for the specific application.<\/li>\n<\/ul>\n
    \n

    Frequently Asked Questions<\/h2>\n

    What is the pad printing process and how does it differ from screen printing?<\/h3>\n

    The pad printing process transfers ink from a shallow-etched clich\u00e9 plate to the product surface using a flexible silicone pad, which compresses and conforms to the product’s surface geometry. Screen printing uses a mesh stencil through which ink is forced directly onto the product surface, requiring flat contact across the print area. The fundamental difference is that pad printing can print on curved, concave, and irregular surfaces \u2014 where screen printing mesh loses contact and produces incomplete or distorted marks \u2014 because the silicone pad’s elasticity allows it to follow the surface profile. Screen printing is more efficient for large flat graphics (up to 500+ mm width per pass) and deposits a thicker, more opaque ink layer. Pad printing is limited to smaller print areas (typically under 100\u2013150 mm) but achieves approximately 0.1\u20130.2 mm feature resolution on any accessible surface geometry.<\/p>\n

    What materials can be pad printed?<\/h3>\n

    Pad printing is compatible with a wide range of materials, but adhesion quality varies significantly. High-surface-energy plastics (ABS, polycarbonate, ABS\/PC blends) accept standard pad printing inks without surface treatment and are the most common applications in consumer electronics, medical housings, and automotive components. Low-surface-energy plastics (polypropylene, polyethylene, nylon) require surface activation \u2014 flame treatment, corona discharge, or plasma treatment \u2014 to raise surface energy above approximately 38 mN\/m before reliable adhesion is achieved. Metals (aluminum, stainless steel) require cleaning and degreasing and benefit from primer or adhesion promoter for wear resistance. Glass requires specialized glass-compatible inks. Silicone rubber and PTFE have very low surface energy (22 and 18\u201320 mN\/m respectively) and cannot be reliably pad printed by standard methods; specialized plasma treatment and silicone-specific inks are required, and durability is typically lower than on other materials.<\/p>\n

    Is pad printing durable?<\/h3>\n

    Pad printing durability depends on the specific combination of ink system, substrate material, surface preparation, and service environment. On correctly prepared ABS or polycarbonate with a compatible ink system, pad-printed marks withstand thousands of light contact cycles, standard cleaning with mild aqueous detergents, and indoor service conditions for years. The mark fails when subjected to: abrasive mechanical contact (repeated hard rubbing, repeated button presses beyond the ink system’s rated cycle count), exposure to aggressive solvents (IPA, acetone, MEK), UV radiation without UV-stable ink, or temperatures outside the ink’s rated range. For high-wear applications (industrial buttons, outdoor components, sterilizable medical instruments), durability validation testing \u2014 ASTM D3359 adhesion, RCA abrasion, chemical resistance per the actual service conditions \u2014 should be completed before committing to pad printing as the marking method.<\/p>\n

    When should laser marking be used instead of pad printing?<\/h3>\n

    Laser marking should replace pad printing when: permanent, indelible identification is required (regulatory traceability marks, FDA UDI on medical devices per 21 CFR 830, aerospace part serialization); the component is subject to repeated chemical cleaning or sterilization cycles that would degrade an ink-based mark; the marking surface undergoes significant mechanical wear (high-cycle actuated buttons, handled tools, instrument grips); or single-color text and code readability is the primary requirement rather than visual branding with color. Laser marking produces no ink film \u2014 the mark is created by a physical or chemical change in the material surface \u2014 and cannot be erased or altered without damaging the part. Its limitations are that it typically cannot produce colored marks and is less suitable for decorative multi-color logos and graphics, which is where pad printing retains its advantage.<\/p>\n

    What is the minimum text size that can be pad printed?<\/h3>\n

    The practical minimum for pad printing is approximately 0.1\u20130.2 mm for line width and approximately 0.8\u20131.0 mm for text character height (for readability with simple sans-serif fonts at that size). Below this range, ink film viscosity, pad compression variability, and surface roughness of the substrate begin to cause inconsistent reproduction of the finest features. Achievable minimum size is also influenced by the etch depth and quality of the clich\u00e9, the ink viscosity, and the substrate surface condition. For alphanumeric text smaller than approximately 1.0 mm character height, laser marking typically provides more reliable and consistent readability in production. QR codes with cells smaller than approximately 0.2 mm are more reliably produced by laser marking than by pad printing.<\/p>\n

    \n

    Written by the CMS engineering team with 15+ years of experience producing CNC machined, injection-molded, and surface-finished components for consumer electronics, medical devices, automotive, and industrial OEM manufacturing programs \u2014 including pad printing specification and supplier coordination for product marking on curved and complex-geometry plastic and metal components. Technical references: ASTM D3359 (Adhesion by Tape Test), IEC 60068-2 (Environmental Testing for Ink Durability), ISO 105 (Color Fastness to Rubbing), SGIA Pad Printing Technology Reference.<\/em><\/p>\n

    \n

    Sourcing Precision CNC Machined and Pad-Printed Components?<\/strong><\/p>\n

    At CMS, we produce precision CNC machined and injection-molded components with coordinated pad printing services \u2014 including ink adhesion testing, multi-color registration, medical-grade ink systems, and full production marking documentation.<\/p>\n

    [Request a pad printing specification review and component quote \u2192]<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

    Pad printing process: how it works, materials compatibility, vs screen printing & laser marking, durability limits & product marking selection guide.<\/p>","protected":false},"author":1,"featured_media":11857,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[165],"tags":[],"class_list":["post-11758","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-surface-treatment-guide"],"yoast_head":"\nPad Printing Process: When Should You Use It?<\/title>\n<meta name=\"description\" content=\"Pad printing process: how it works, materials compatibility, vs screen printing & laser marking, durability limits & product marking selection guide.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.cncmachiningshops.com\/pt\/pad-printing-process\/\" \/>\n<meta property=\"og:locale\" content=\"pt_PT\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Pad Printing Process: When Should You Use It for Product Marking?\" \/>\n<meta property=\"og:description\" content=\"Pad printing process: how it works, materials compatibility, vs screen printing & laser marking, durability limits & product marking selection guide.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.cncmachiningshops.com\/pt\/pad-printing-process\/\" \/>\n<meta property=\"og:site_name\" content=\"CNC Machining Shops\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-13T10:00:29+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-15T14:11:16+00:00\" \/>\n<meta name=\"author\" content=\"cncmachiningshops\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"cncmachiningshops\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tempo estimado de leitura\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/\"},\"author\":{\"name\":\"cncmachiningshops\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/person\\\/2593a2e2de68be71300e10f486236551\"},\"headline\":\"Pad Printing Process: When Should You Use It for Product Marking?\",\"datePublished\":\"2026-06-13T10:00:29+00:00\",\"dateModified\":\"2026-07-15T14:11:16+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/\"},\"wordCount\":3040,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/Pad-Printing-Process-800x600-1.jpg\",\"articleSection\":[\"Surface Treatment Guide\"],\"inLanguage\":\"pt-PT\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/\",\"name\":\"Pad Printing Process: When Should You Use It?\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/Pad-Printing-Process-800x600-1.jpg\",\"datePublished\":\"2026-06-13T10:00:29+00:00\",\"dateModified\":\"2026-07-15T14:11:16+00:00\",\"description\":\"Pad printing process: how it works, materials compatibility, vs screen printing & laser marking, durability limits & product marking selection guide.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#breadcrumb\"},\"inLanguage\":\"pt-PT\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-PT\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/Pad-Printing-Process-800x600-1.jpg\",\"contentUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/Pad-Printing-Process-800x600-1.jpg\",\"width\":800,\"height\":600,\"caption\":\"Pad Printing Process 800x600\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/pad-printing-process\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Pad Printing Process: When Should You Use It for Product Marking?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#website\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\",\"name\":\"CNC Machining Shops\",\"description\":\"10+ Years CNC Machining Service Supplier\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\"},\"alternateName\":\"CMS\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"pt-PT\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\",\"name\":\"CNC Machining Shops\",\"alternateName\":\"CMS\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-PT\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/11\\\/CMS_Logo_1000x1000.png\",\"contentUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/11\\\/CMS_Logo_1000x1000.png\",\"width\":800,\"height\":800,\"caption\":\"CNC Machining Shops\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"description\":\"Shenzhen CMS Technology Co., Ltd. is located in Shenzhen, Guangdong, China. It was established in 2012 with a factory area of \u200b\u200b3,000 square meters. It is a company specializing in CNC machining and precision parts manufacturing. We have passed ISO9001, IATF16949, ISO13485 certification and are your trusted partner.\",\"email\":\"info@cncmachiningshops.com\",\"telephone\":\"+8617196430663\",\"legalName\":\"Shenzhen CMS Technology Co., Ltd.\",\"foundingDate\":\"2012-07-22\",\"numberOfEmployees\":{\"@type\":\"QuantitativeValue\",\"minValue\":\"11\",\"maxValue\":\"50\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/person\\\/2593a2e2de68be71300e10f486236551\",\"name\":\"cncmachiningshops\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-PT\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"caption\":\"cncmachiningshops\"},\"sameAs\":[\"https:\\\/\\\/cncmachiningshops.com\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Processo de Tampografia: Quando Voc\u00ea Deve Us\u00e1-lo?","description":"Processo de tampografia: como funciona, compatibilidade de materiais, vs serigrafia e marca\u00e7\u00e3o a laser, limites de durabilidade e guia de sele\u00e7\u00e3o para marca\u00e7\u00e3o de produtos.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.cncmachiningshops.com\/pt\/pad-printing-process\/","og_locale":"pt_PT","og_type":"article","og_title":"Pad Printing Process: When Should You Use It for Product Marking?","og_description":"Pad printing process: how it works, materials compatibility, vs screen printing & laser marking, durability limits & product marking selection guide.","og_url":"https:\/\/www.cncmachiningshops.com\/pt\/pad-printing-process\/","og_site_name":"CNC Machining Shops","article_published_time":"2026-06-13T10:00:29+00:00","article_modified_time":"2026-07-15T14:11:16+00:00","author":"cncmachiningshops","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"cncmachiningshops","Tempo estimado de leitura":"13 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#article","isPartOf":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/"},"author":{"name":"cncmachiningshops","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/person\/2593a2e2de68be71300e10f486236551"},"headline":"Pad Printing Process: When Should You Use It for Product Marking?","datePublished":"2026-06-13T10:00:29+00:00","dateModified":"2026-07-15T14:11:16+00:00","mainEntityOfPage":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/"},"wordCount":3040,"commentCount":0,"publisher":{"@id":"https:\/\/www.cncmachiningshops.com\/#organization"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2026\/06\/Pad-Printing-Process-800x600-1.jpg","articleSection":["Surface Treatment Guide"],"inLanguage":"pt-PT","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/","url":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/","name":"Processo de Tampografia: Quando Voc\u00ea Deve Us\u00e1-lo?","isPartOf":{"@id":"https:\/\/www.cncmachiningshops.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#primaryimage"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2026\/06\/Pad-Printing-Process-800x600-1.jpg","datePublished":"2026-06-13T10:00:29+00:00","dateModified":"2026-07-15T14:11:16+00:00","description":"Processo de tampografia: como funciona, compatibilidade de materiais, vs serigrafia e marca\u00e7\u00e3o a laser, limites de durabilidade e guia de sele\u00e7\u00e3o para marca\u00e7\u00e3o de produtos.","breadcrumb":{"@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#breadcrumb"},"inLanguage":"pt-PT","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.cncmachiningshops.com\/pad-printing-process\/"]}]},{"@type":"ImageObject","inLanguage":"pt-PT","@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#primaryimage","url":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2026\/06\/Pad-Printing-Process-800x600-1.jpg","contentUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2026\/06\/Pad-Printing-Process-800x600-1.jpg","width":800,"height":600,"caption":"Pad Printing Process 800x600"},{"@type":"BreadcrumbList","@id":"https:\/\/www.cncmachiningshops.com\/pad-printing-process\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.cncmachiningshops.com\/"},{"@type":"ListItem","position":2,"name":"Pad Printing Process: When Should You Use It for Product Marking?"}]},{"@type":"WebSite","@id":"https:\/\/www.cncmachiningshops.com\/#website","url":"https:\/\/www.cncmachiningshops.com\/","name":"Oficinas de usinagem CNC","description":"Fornecedor de Servi\u00e7os de Usinagem CNC com mais de 10 Anos","publisher":{"@id":"https:\/\/www.cncmachiningshops.com\/#organization"},"alternateName":"CMS","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.cncmachiningshops.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"pt-PT"},{"@type":"Organization","@id":"https:\/\/www.cncmachiningshops.com\/#organization","name":"Oficinas de usinagem CNC","alternateName":"CMS","url":"https:\/\/www.cncmachiningshops.com\/","logo":{"@type":"ImageObject","inLanguage":"pt-PT","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/11\/CMS_Logo_1000x1000.png","contentUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/11\/CMS_Logo_1000x1000.png","width":800,"height":800,"caption":"CNC Machining Shops"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/logo\/image\/"},"description":"Shenzhen CMS Technology Co., Ltd. est\u00e1 localizada em Shenzhen, Guangdong, China. Foi fundada em 2012 com uma \u00e1rea fabril de 3.000 metros quadrados. \u00c9 uma empresa especializada em usinagem CNC e fabrica\u00e7\u00e3o de pe\u00e7as de precis\u00e3o. Obtivemos as certifica\u00e7\u00f5es ISO9001, IATF16949, ISO13485 e somos seu parceiro de confian\u00e7a.","email":"info@cncmachiningshops.com","telephone":"+8617196430663","legalName":"Shenzhen CMS Technology Co., Ltd.","foundingDate":"2012-07-22","numberOfEmployees":{"@type":"QuantitativeValue","minValue":"11","maxValue":"50"}},{"@type":"Person","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/person\/2593a2e2de68be71300e10f486236551","name":"oficinas de usinagem cnc","image":{"@type":"ImageObject","inLanguage":"pt-PT","@id":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","caption":"cncmachiningshops"},"sameAs":["https:\/\/cncmachiningshops.com"]}]}},"_links":{"self":[{"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/posts\/11758","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/comments?post=11758"}],"version-history":[{"count":0,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/posts\/11758\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/media\/11857"}],"wp:attachment":[{"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/media?parent=11758"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/categories?post=11758"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/pt\/wp-json\/wp\/v2\/tags?post=11758"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}