{"id":9405,"date":"2025-12-17T14:38:41","date_gmt":"2025-12-17T06:38:41","guid":{"rendered":"https:\/\/www.cncmachiningshops.com\/?p=9405"},"modified":"2026-01-01T10:26:31","modified_gmt":"2026-01-01T02:26:31","slug":"5083-aluminum","status":"publish","type":"post","link":"https:\/\/www.cncmachiningshops.com\/de\/5083-aluminum\/","title":{"rendered":"Aluminiumlegierung 5083: Eigenschaften, Korrosionsbest\u00e4ndigkeit, Schwei\u00dfbarkeit und strukturelle Anwendungen"},"content":{"rendered":"
\n
\n
\n
5083 aluminum alloy is a structural alloy in the 5xxx series of wrought aluminum alloys. 5083 is a high-magnesium, non-heat-treatable alloy that is made to be very resistant to corrosion and maintain its weld integrity when subjected to constant mechanical stress. Because of these qualities, it has long been the standard marine grade aluminum for ships, offshore platforms, and heavy welded assemblies.<\/div>\n
The ongoing preference for 5083 in marine engineering is based on how well it works in real life, not on how well it meets specifications. The high magnesium content makes it very resistant to corrosion from seawater. The lack of copper also keeps it from corroding through galvanic and intergranular mechanisms that affect many high-strength alloys. Most importantly, 5083 keeps a lot of its strength after welding, which makes it better for big structures where joint efficiency is more important than peak tensile values.<\/div>\n
But this focus on performance creates an important engineering trade-off: good corrosion resistance and weldability don't mean that machining is easy or that the dimensions are very precise. First and foremost, 5083 is a structural alloy, not a material for precision machining.<\/div>\n
This guide looks at 5083 aluminum from the point of view of how it can be used. We will look at its makeup, mechanical limits, processing properties, and how it compares to other common alloys. This will help engineers set realistic goals and choose the right material for tough situations.<\/div>\n

What is the 5083 aluminum alloy? Position in the Series and Composition<\/h2>\n
5083 aluminum alloy is a strong member of the 5xxx series of wrought aluminum alloys. It has an Aluminum-Magnesium (Al-Mg) chemistry and is classified as a non-heat-treatable aluminum. 5083 gets its mechanical strength from solid-solution strengthening and controlled work hardening, while the 6xxx series gets its strength from aging.<\/div>\n

The 5xxx Series of Aluminum Alloys and Their Role in Structures<\/h3>\n
The 5xxx series has a few key features in common:<\/div>\n
    \n
  • \n
    Magnesium is the main metal that makes up the alloy.<\/div>\n<\/li>\n
  • \n
    Very resistant to saltwater and places with a lot of chloride.<\/div>\n<\/li>\n
  • \n
    Better weldability with only a small loss of strength in the Heat-Affected Zone (HAZ).<\/div>\n<\/li>\n<\/ul>\n
    5083 is at the top of the strength range in this series. 5052 aluminum is better for making sheet metal because it can be shaped easily. 5083 aluminum, on the other hand, is made to hold up panels, stiffeners, and structural members that are under a lot of stress for a long time.<\/div>\n

    Why 5083 Is a Marine Alloy for Structures<\/h3>\n
    5083 has a unique set of properties that make it work well in real-world situations: it is highly resistant to corrosion, has strong welded joints, and has stable mechanical performance. A simplified positioning comparison shows what it does:<\/div>\n
    Positioning of Aluminum Alloy Series in Table 1<\/strong><\/div>\n
    \n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n
    Alloy<\/td>\nMain Strength Mechanism<\/td>\nResistance to Corrosion<\/td>\nCommon Engineering Focus<\/td>\n<\/tr>\n
    5052<\/td>\nModerate (Solid Solution)<\/td>\nExcellent<\/td>\nFormed sheet metal, tanks, and enclosures.<\/td>\n<\/tr>\n
    5083<\/td>\nHigh (Solid Solution)<\/td>\nExcellent (Marine)<\/td>\nWelded structural marine parts, hulls.<\/td>\n<\/tr>\n
    6061<\/td>\nModerate (Precipitation)<\/td>\nGood<\/td>\nGeneral structural frames and machined parts.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
    This comparison shows the material logic: 5083 is the best choice when structural integrity and corrosion resistance in marine environments are more important than how easy it is to machine.<\/div>\n

    The chemical makeup of 5083 aluminum and how it affects engineering<\/h3>\n
    The carefully balanced chemical makeup of 5083 aluminum is what makes it work so well. Copper and Zinc are not present on purpose because they would make corrosion resistance worse.<\/div>\n
    Table 2: Common Chemical Composition (wt.%)<\/strong><\/div>\n
    \n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n
    Element<\/td>\nMinimum %<\/td>\nMaximum %<\/td>\nPrimary Engineering Function<\/td>\n<\/tr>\n
    Magnesium (Mg)<\/td>\n4<\/td>\n4.9<\/td>\nA major strengthening agent that makes things less likely to corrode in water.<\/td>\n<\/tr>\n
    Manganese (Mn)<\/td>\n0.4<\/td>\n1<\/td>\ncontrols the structure of grains and makes them more stable when they are tired.<\/td>\n<\/tr>\n
    Chromium (Cr)<\/td>\n0.05<\/td>\n0.25<\/td>\nIt makes the grain finer and makes it less likely to corrode under stress.<\/td>\n<\/tr>\n
    Silicon (Si)<\/td>\n\u2013<\/td>\n0.4<\/td>\nan impurity that is kept low.<\/td>\n<\/tr>\n
    Iron (Fe)<\/td>\n\u2013<\/td>\n0.4<\/td>\na low level of impurity.<\/td>\n<\/tr>\n
    Copper (Cu)<\/td>\n\u2013<\/td>\n0.1<\/td>\nvery low to stop galvanic corrosion.<\/td>\n<\/tr>\n
    Aluminum (Al)<\/td>\nBalance<\/td>\n<\/td>\nBase matrix.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    How High Magnesium Content Works<\/h3>\n
      \n
    • \n
      Solid-Solution Strengthening:<\/strong> Magnesium atoms mix with the aluminum lattice, which makes the lattice distort and makes it harder for dislocations to move. This makes the yield strength higher without needing to be heated.<\/div>\n<\/li>\n
    • \n
      Corrosion Barrier:<\/strong> Magnesium helps make a stable, protective oxide layer that doesn't pit in saltwater.<\/div>\n<\/li>\n
    • \n
      Weld Retention:<\/strong> The alloy keeps most of its strength after welding because there are no precipitates to dissolve. In contrast, 6061 loses up to 40\u201350% of its strength in the weld zone.<\/div>\n<\/li>\n<\/ul>\n

      5083 Aluminum's Physical and Mechanical Properties<\/h2>\n
      Temper (work hardening) and processing history control the mechanical behavior of 5083 because it can't be heat-treated.<\/div>\n

      Mechanical Properties by Temper<\/h3>\n
      H116 and H321 are the most important tempers for marine use.<\/div>\n
      Table 3: Comparison of Mechanical Properties<\/strong><\/div>\n
      \n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n
      Property<\/td>\n5083-O (Annealed)<\/td>\n5083-H116<\/td>\n5083-H321<\/td>\nStructural Interpretation<\/td>\n<\/tr>\n
      Tensile Strength<\/td>\n~290 MPa<\/td>\n~330 MPa<\/td>\n~345 MPa<\/td>\nstrong enough for the main hull structures.<\/td>\n<\/tr>\n
      Yield Strength<\/td>\n~145 MPa<\/td>\n~230 MPa<\/td>\n~240 MPa<\/td>\na big jump from 5052; it doesn't change shape.<\/td>\n<\/tr>\n
      Elongation<\/td>\n22%<\/td>\n10\u201314%<\/td>\n10\u201314%<\/td>\nIt stays ductile even when it is hardened, so it can be shaped.<\/td>\n<\/tr>\n
      Fatigue Strength*<\/td>\n~130 MPa<\/td>\n~160 MPa<\/td>\n~160 MPa<\/td>\nStable under cyclic wave loading.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
      *Strength of fatigue at 5\u00d710^8 <\/em>cycles.<\/div>\n

      Physical Characteristics<\/h3>\n
        \n
      • \n
        Density:<\/strong> 2.66 g\/cm\u00b3 (The lowest density of the main structural alloys, which helps with buoyancy).<\/div>\n<\/li>\n
      • \n
        Modulus of elasticity:<\/strong> 70.3 GPa. Stiffness is based on ribbing and thickness, not just the material.<\/div>\n<\/li>\n
      • \n
        Thermal Conductivity:<\/strong> ~121 W\/m-K (lower than 6061, which changes the amount of heat needed for welding).<\/div>\n<\/li>\n<\/ul>\n

        What the Temper Designations H111, H116, and H321 Mean<\/h2>\n
        When it comes to 5083 aluminum, temper designation is a key factor in engineering selection. It checks how well the material works, not just how strong it is.<\/div>\n

        H111: The Temper for General Use<\/h3>\n
          \n
        • \n
          Definition:<\/strong> Material that has been shaped and hardened, but not completely annealed.<\/div>\n<\/li>\n
        • \n
          Use Case:<\/strong> General fabrication where marine certification and maximum strength aren't important.<\/div>\n<\/li>\n<\/ul>\n

          H116: The Marine Standard<\/h3>\n
            \n
          • \n
            Definition:<\/strong> Strain that has been hardened and treated in a certain way to stop exfoliation corrosion.<\/div>\n<\/li>\n
          • \n
            Use case:<\/strong> hulls of ships, structures underwater. Many classification societies, like DNV and Lloyd's, require this temper for saltwater exposure.<\/div>\n<\/li>\n<\/ul>\n

            H321: The Marine Temper That Is Stable<\/h3>\n
              \n
            • \n
              Definition:<\/strong> Strain-hardened and then thermally stabilized.<\/div>\n<\/li>\n
            • \n
              Use Case:<\/strong> Similar to H116, but over time it is more resistant to Stress Corrosion Cracking (SCC). It stops high-Magnesium alloys from getting softer as they get older.<\/div>\n<\/li>\n<\/ul>\n
              Never use H111 instead of H116\/H321 in saltwater structural applications, according to engineering rules. The strength may be similar, but the ability to resist corrosion is very different.<\/div>\n

              5083's ability to resist corrosion in marine settings<\/h2>\n
              Marine grade aluminum that is 5083 is the best. What it has (magnesium) and what it doesn't have (copper) affect how well it works.<\/div>\n

              Why 5083 is better in seawater<\/h3>\n
                \n
              • \n
                Oxide Stability:<\/strong> The Mg-rich oxide film can heal itself and stays stable in chloride environments with a pH of 4 to 8.5.<\/div>\n<\/li>\n
              • \n
                No Galvanic Couples:<\/strong> Alloys like 2024 or 7075 that are very strong have Copper\/Zinc precipitates that make internal micro-batteries, which cause pitting to happen quickly. 5083 is homogeneous on a microstructural level, so this failure mode doesn't happen.<\/div>\n<\/li>\n<\/ul>\n

                Stress Corrosion Cracking (SCC) Limits<\/h3>\n
                5083 is great, but high-Mg alloys (>3% Mg) have a \"Achilles' heel.\" If they are exposed to temperatures above 65\u00b0C (150\u00b0F) for a long time, Magnesium can precipitate at grain boundaries, making the material more sensitive to SCC.<\/div>\n
                Design Limit:<\/strong> Don't use 5083 for parts that are part of the engine's exhaust or the hot section of the structure. 5052 (lower Mg) is safer at higher temperatures, but it is also weaker.<\/div>\n

                Weldability of 5083 Aluminum and Performance After Welding<\/h2>\n
                5083 is well-known as a very weldable structural metal.<\/div>\n

                Why 5083 stays strong<\/h3>\n
                In heat-treatable alloys like 6061, the heat from welding destroys the temper and makes the Heat Affected Zone (HAZ) weak again.<\/div>\n
                The solid solution of magnesium gives 5083 its strength. The heat from welding does not get rid of the Magnesium in the solution. 5083 keeps a lot more of its original strength in the HAZ than 6061, even though some work-hardening is lost.<\/div>\n

                Filler metals<\/h3>\n
                  \n
                • \n
                  The standard filler is ER5183.<\/strong> It has the same strength and resistance to corrosion as the base metal.<\/div>\n<\/li>\n
                • \n
                  ER5356:<\/strong> A good alternative that is often used in general fabrication.<\/div>\n<\/li>\n
                • \n
                  Don't use 4xxx series fillers with 5083.<\/strong> The Silicon in the filler and the Magnesium in the base metal react to make Magnesium-Silicide, which is brittle (Mg2Si), which made the weld crack.<\/div>\n<\/li>\n<\/ul>\n

                  CNC Machining Features of 5083 Aluminum<\/h2>\n
                  From a manufacturing point of view, CNC machining 5083 aluminum has its pros and cons. It is not a free-machining alloy; it is a structural alloy.<\/div>\n

                  Problems with Machinability<\/h3>\n
                    \n
                  • \n
                    \"Gummy\" Behavior:<\/strong> The chips are hard and likely to smear because they have a lot of magnesium in them. It doesn't break chips as easily as 6061 or 2011.<\/div>\n<\/li>\n
                  • \n
                    Built-Up Edge (BUE):<\/strong> Aluminum tends to stick to the cutting tool.<\/div>\n<\/li>\n
                  • \n
                    Solution:<\/strong> Use polished carbide inserts with high positive rake angles and strong coolant.<\/div>\n<\/li>\n
                  • \n
                    Surface Finish:<\/strong> It's hard to get a mirror finish. Compared to 6061, the surface often looks dull or a little rough.<\/div>\n<\/li>\n<\/ul>\n

                    Stress and distortion that are left over<\/h3>\n
                    5083 has been worked hard (rolled) a lot. It has a lot of stress inside.<\/div>\n
                      \n
                    • \n
                      The issue:<\/strong> is that when you machine away a layer of material, you let go of the stress that keeps the plate flat. The part bends or turns.<\/div>\n<\/li>\n
                    • \n
                      The Fix:<\/strong> 5083 isn't the best choice for machined parts with thin walls that need to be very precise. If you need very precise measurements, use a rough machine, stress relieve (or let sit), and then finish machine. Or, switch to Cast Tooling Plate (ATP-5), which is a 5xxx alloy that has been stress-relieved.<\/div>\n<\/li>\n<\/ul>\n

                      5083 Aluminum's Uses in Structures<\/h2>\n
                      5083 is the best choice when plate-based construction, joint integrity, and durability are the most important factors.<\/div>\n
                        \n
                      • \n
                        Marine Shipbuilding:<\/strong> Hulls, decks, and superstructures for yachts, patrol boats, and ferries.<\/div>\n<\/li>\n
                      • \n
                        Offshore oil and gas:<\/strong> Living quarters, helidecks, and gangways on oil rigs (where steel weight is too high).<\/div>\n<\/li>\n
                      • \n
                        Pressure Vessels:<\/strong> Unfired welded pressure vessels for cryogenics (like LNG tanks) and moving chemicals.<\/div>\n<\/li>\n
                      • \n
                        Armor plating:<\/strong> for military vehicles. 5083 is very good at stopping bullets and absorbing energy.<\/div>\n<\/li>\n
                      • \n
                        Transportation:<\/strong> Tipper truck bodies and rail cars that need to be strong and resistant to wear.<\/div>\n<\/li>\n<\/ul>\n

                        A Comparison of 5083 and 5052 Aluminum<\/h2>\n
                        People often have trouble deciding between 5083 and 5052. Both are marine-grade, but they do different things.<\/div>\n
                        Table 4: A comparison of 5083 and 5052<\/strong><\/div>\n
                        \n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n
                        Feature<\/td>\n5083 Aluminum<\/td>\n5052 Aluminum<\/td>\nHow to Choose<\/td>\n<\/tr>\n
                        Strength<\/td>\nHigh Yield (~230 MPa)<\/td>\nModerate Yield (~195 MPa)<\/td>\nUse 5083 for frames and hulls that need to hold weight.<\/td>\n<\/tr>\n
                        Formability<\/td>\nModerate<\/td>\nExcellent<\/td>\nUse 5052 for tanks and panels that are bent in complicated ways.<\/td>\n<\/tr>\n
                        Corrosion<\/td>\nExcellent<\/td>\nExcellent<\/td>\nBoth can handle seawater.<\/td>\n<\/tr>\n
                        Weldability<\/td>\nExcellent (Stronger Joint)<\/td>\nExcellent (Easier)<\/td>\n5083 is the best choice for structural welds.<\/td>\n<\/tr>\n
                        Cost<\/td>\nhigher<\/td>\nlower<\/td>\nuse 5052 for cladding that isn't structural.<\/td>\n<\/tr>\n
                        Common Part<\/td>\nShip Hull Plate<\/td>\nFuel Tank\/Bracket<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
                        Use 5083 for the skin and structure of a ship, according to engineering rules. Use 5052 for the cabinets, tanks, and complicated sheet metal brackets inside.<\/div>\n

                        Limitations of 5083 Aluminum in Engineering<\/h2>\n
                        5083 is strong, but it has limits.<\/div>\n
                          \n
                        • \n
                          Do not <\/strong>use<\/strong> for long periods of time above 65\u00b0C (150\u00b0F).<\/strong> Stress Corrosion Cracking (SCC) is a risk.<\/div>\n<\/li>\n
                        • \n
                          Not for Precision Parts:<\/strong> Because it has a lot of residual stress, it's not a good choice for machined housings that need to fit tightly and have complex shapes (use 6061-T6 or Cast Plate).<\/div>\n<\/li>\n
                        • \n
                          Looks:<\/strong> It doesn't anodize for decorative purposes like 5052 or 6061 do. The finish is usually a dark gray color that isn't even.<\/div>\n<\/li>\n<\/ul>\n

                          Summary\u2014Important Engineering Points<\/h2>\n
                          5083 aluminum alloy is the strongest metal for marine use. It is not a general-purpose alloy; it is a special structural material made for tough conditions.<\/div>\n
                          Important Points:<\/strong><\/div>\n
                            \n
                          • \n
                            Use 5083<\/strong> for welded structures that will be in contact with seawater, cryogenics, or heavy impacts.<\/div>\n<\/li>\n
                          • \n
                            Pick the Right Temper:<\/strong> For marine use, use H116 or H321 to stop exfoliation corrosion.<\/div>\n<\/li>\n
                          • \n
                            Design for Welding:<\/strong> Use its high as-welded strength to make large assemblies lighter.<\/div>\n<\/li>\n
                          • \n
                            Respect the Limits:<\/strong> Don't do high-temperature work (>65\u00b0C) or precision machining on thin-walled parts.<\/div>\n<\/li>\n<\/ul>\n
                            Engineers can use 5083 to build structures that can withstand the toughest conditions on Earth if they know what it can and can't do.<\/div>\n

                            FAQ<\/h2>\n
                            Q: Is 5083 stronger than 6061?<\/strong><\/div>\n
                            A: Yes, in the as-welded state. When welded, 6061 loses a lot of strength (to about 110 MPa yield), but 5083 keeps most of its strength (to about 165 MPa yield in the weld zone). 6061-T6 is stronger for parts that are bolted together.<\/div>\n
                            <\/div>\n
                            Q: Is it possible to heat treat 5083?<\/strong><\/div>\n
                            A: No. You can't heat-treat it. It gets stronger only by rolling it. It will get softer when you heat it.<\/div>\n
                            <\/div>\n
                            Q: Does 5083 get rusty?<\/strong><\/div>\n
                            A: No. It makes a strong oxide layer that keeps saltwater from pitting. It is one of the aluminum alloys that resists corrosion the best.<\/div>\n
                            <\/div>\n
                            Q: Is it possible to bend 5083 aluminum?<\/strong><\/div>\n
                            A: Yes, but it needs a bigger bend radius than 5052. 5052 is better for sharp bends. If you bend 5083 too tightly, it can crack, especially in the H116\/H321 tempers.<\/div>\n
                            <\/div>\n
                            Q: What kind of filler wire works best with 5083?<\/strong><\/div>\n
                            A: The standard is ER5183. It's also okay to use ER5356. Do not use 4043.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div>\n","protected":false},"excerpt":{"rendered":"

                            Die Aluminiumlegierung 5083 ist eine Konstruktionslegierung aus der 5xxx-Reihe der kaltverformbaren Aluminiumlegierungen.<\/p>","protected":false},"author":1,"featured_media":9566,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[103],"tags":[],"class_list":["post-9405","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-materials-guide"],"yoast_head":"\n5083 Aluminum Alloy: Properties, Corrosion Resistance & Uses<\/title>\n<meta name=\"description\" content=\"Explore 5083 aluminum alloy properties, excellent corrosion resistance, weldability, and structural uses in marine, shipbuilding, and heavy-duty applications.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.cncmachiningshops.com\/de\/5083-aluminum\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses\" \/>\n<meta property=\"og:description\" content=\"Explore 5083 aluminum alloy properties, excellent corrosion resistance, weldability, and structural uses in marine, shipbuilding, and heavy-duty applications.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.cncmachiningshops.com\/de\/5083-aluminum\/\" \/>\n<meta property=\"og:site_name\" content=\"CNC Machining Shops\" \/>\n<meta property=\"article:published_time\" content=\"2025-12-17T06:38:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-01-01T02:26:31+00:00\" \/>\n<meta name=\"author\" content=\"cncmachiningshops\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Verfasst von\" \/>\n\t<meta name=\"twitter:data1\" content=\"cncmachiningshops\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"11\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/\"},\"author\":{\"name\":\"cncmachiningshops\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/person\\\/2593a2e2de68be71300e10f486236551\"},\"headline\":\"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses\",\"datePublished\":\"2025-12-17T06:38:41+00:00\",\"dateModified\":\"2026-01-01T02:26:31+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/\"},\"wordCount\":2339,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/5083-aluminum-800x600-1.jpg\",\"articleSection\":[\"Materials Guide\"],\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/\",\"name\":\"5083 Aluminum Alloy: Properties, Corrosion Resistance & Uses\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/5083-aluminum-800x600-1.jpg\",\"datePublished\":\"2025-12-17T06:38:41+00:00\",\"dateModified\":\"2026-01-01T02:26:31+00:00\",\"description\":\"Explore 5083 aluminum alloy properties, excellent corrosion resistance, weldability, and structural uses in marine, shipbuilding, and heavy-duty applications.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/5083-aluminum-800x600-1.jpg\",\"contentUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/12\\\/5083-aluminum-800x600-1.jpg\",\"width\":800,\"height\":600,\"caption\":\"5083 aluminum 800x600\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/5083-aluminum\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#website\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\",\"name\":\"CNC Machining Shops\",\"description\":\"10+ Years CNC Machining Service Supplier\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\"},\"alternateName\":\"CMS\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#organization\",\"name\":\"CNC Machining Shops\",\"alternateName\":\"CMS\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/11\\\/CMS_Logo_1000x1000.png\",\"contentUrl\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/wp-content\\\/uploads\\\/2025\\\/11\\\/CMS_Logo_1000x1000.png\",\"width\":800,\"height\":800,\"caption\":\"CNC Machining Shops\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"description\":\"Shenzhen CMS Technology Co., Ltd. is located in Shenzhen, Guangdong, China. It was established in 2012 with a factory area of \u200b\u200b3,000 square meters. It is a company specializing in CNC machining and precision parts manufacturing. We have passed ISO9001, IATF16949, ISO13485 certification and are your trusted partner.\",\"email\":\"info@cncmachiningshops.com\",\"telephone\":\"+8617196430663\",\"legalName\":\"Shenzhen CMS Technology Co., Ltd.\",\"foundingDate\":\"2012-07-22\",\"numberOfEmployees\":{\"@type\":\"QuantitativeValue\",\"minValue\":\"11\",\"maxValue\":\"50\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.cncmachiningshops.com\\\/#\\\/schema\\\/person\\\/2593a2e2de68be71300e10f486236551\",\"name\":\"cncmachiningshops\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g\",\"caption\":\"cncmachiningshops\"},\"sameAs\":[\"https:\\\/\\\/cncmachiningshops.com\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Aluminiumlegierung 5083: Eigenschaften, Korrosionsbest\u00e4ndigkeit und Anwendungsbereiche","description":"Entdecken Sie die Eigenschaften der Aluminiumlegierung 5083, ihre hervorragende Korrosionsbest\u00e4ndigkeit, Schwei\u00dfbarkeit sowie ihre strukturellen Einsatzm\u00f6glichkeiten in der Schifffahrt, im Schiffbau und bei Hochleistungsanwendungen.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.cncmachiningshops.com\/de\/5083-aluminum\/","og_locale":"de_DE","og_type":"article","og_title":"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses","og_description":"Explore 5083 aluminum alloy properties, excellent corrosion resistance, weldability, and structural uses in marine, shipbuilding, and heavy-duty applications.","og_url":"https:\/\/www.cncmachiningshops.com\/de\/5083-aluminum\/","og_site_name":"CNC Machining Shops","article_published_time":"2025-12-17T06:38:41+00:00","article_modified_time":"2026-01-01T02:26:31+00:00","author":"cncmachiningshops","twitter_card":"summary_large_image","twitter_misc":{"Verfasst von":"cncmachiningshops","Gesch\u00e4tzte Lesezeit":"11\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#article","isPartOf":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/"},"author":{"name":"cncmachiningshops","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/person\/2593a2e2de68be71300e10f486236551"},"headline":"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses","datePublished":"2025-12-17T06:38:41+00:00","dateModified":"2026-01-01T02:26:31+00:00","mainEntityOfPage":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/"},"wordCount":2339,"commentCount":0,"publisher":{"@id":"https:\/\/www.cncmachiningshops.com\/#organization"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/12\/5083-aluminum-800x600-1.jpg","articleSection":["Materials Guide"],"inLanguage":"de","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/","url":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/","name":"Aluminiumlegierung 5083: Eigenschaften, Korrosionsbest\u00e4ndigkeit und Anwendungsbereiche","isPartOf":{"@id":"https:\/\/www.cncmachiningshops.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#primaryimage"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/12\/5083-aluminum-800x600-1.jpg","datePublished":"2025-12-17T06:38:41+00:00","dateModified":"2026-01-01T02:26:31+00:00","description":"Entdecken Sie die Eigenschaften der Aluminiumlegierung 5083, ihre hervorragende Korrosionsbest\u00e4ndigkeit, Schwei\u00dfbarkeit sowie ihre strukturellen Einsatzm\u00f6glichkeiten in der Schifffahrt, im Schiffbau und bei Hochleistungsanwendungen.","breadcrumb":{"@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.cncmachiningshops.com\/5083-aluminum\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#primaryimage","url":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/12\/5083-aluminum-800x600-1.jpg","contentUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/12\/5083-aluminum-800x600-1.jpg","width":800,"height":600,"caption":"5083 aluminum 800x600"},{"@type":"BreadcrumbList","@id":"https:\/\/www.cncmachiningshops.com\/5083-aluminum\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.cncmachiningshops.com\/"},{"@type":"ListItem","position":2,"name":"5083 Aluminum Alloy: Characteristics, Corrosion Resistance, Weldability, and Structural Uses"}]},{"@type":"WebSite","@id":"https:\/\/www.cncmachiningshops.com\/#website","url":"https:\/\/www.cncmachiningshops.com\/","name":"CNC-Bearbeitungswerkst\u00e4tten","description":"Seit \u00fcber 10 Jahren Anbieter von CNC-Bearbeitungsdienstleistungen","publisher":{"@id":"https:\/\/www.cncmachiningshops.com\/#organization"},"alternateName":"CMS","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.cncmachiningshops.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/www.cncmachiningshops.com\/#organization","name":"CNC-Bearbeitungswerkst\u00e4tten","alternateName":"CMS","url":"https:\/\/www.cncmachiningshops.com\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/11\/CMS_Logo_1000x1000.png","contentUrl":"https:\/\/www.cncmachiningshops.com\/wp-content\/uploads\/2025\/11\/CMS_Logo_1000x1000.png","width":800,"height":800,"caption":"CNC Machining Shops"},"image":{"@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/logo\/image\/"},"description":"Die Shenzhen CMS Technology Co., Ltd. hat ihren Sitz in Shenzhen, Guangdong, China. Das Unternehmen wurde 2012 gegr\u00fcndet und verf\u00fcgt \u00fcber eine Produktionsfl\u00e4che von 3.000 Quadratmetern. Es ist auf die Bearbeitung von CNC-Teilen und die Fertigung von Pr\u00e4zisionsteilen spezialisiert. Wir sind nach ISO 9001, IATF 16949 und ISO 13485 zertifiziert und Ihr zuverl\u00e4ssiger Partner.","email":"info@cncmachiningshops.com","telephone":"+8617196430663","legalName":"Shenzhen CMS Technology Co., Ltd.","foundingDate":"2012-07-22","numberOfEmployees":{"@type":"QuantitativeValue","minValue":"11","maxValue":"50"}},{"@type":"Person","@id":"https:\/\/www.cncmachiningshops.com\/#\/schema\/person\/2593a2e2de68be71300e10f486236551","name":"cncmachingshops","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/36a63d96ed08f8805561107422de4e83bbf8d1669dbc9655acab534bc3e1ed17?s=96&d=mm&r=g","caption":"cncmachiningshops"},"sameAs":["https:\/\/cncmachiningshops.com"]}]}},"_links":{"self":[{"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/posts\/9405","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/comments?post=9405"}],"version-history":[{"count":0,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/posts\/9405\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/media\/9566"}],"wp:attachment":[{"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/media?parent=9405"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/categories?post=9405"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cncmachiningshops.com\/de\/wp-json\/wp\/v2\/tags?post=9405"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}